|
Only $199.00
|
|
|
Buy with confidence
|
|
For additional information about our cases contact us at
877- 692- 2738
Simply Measure Your Lights And Choose The Best Size
For All 4 Available Sizes See Bottom Of Photo And Buy From Our Store Category
“LED PAR Multi Lights ATA Cases”
These cases are designed to protect the considerable number of inexpensive LED PAR lights on today’s market, many of our customer’s have asked us for an low cost alternative to expensive ATA cases as they find that type of case is an overkill in both price and construction to house such a low cost light. We came up with this medium duty low priced line of cases to fill that need. They are constructed of 1/4″ plywood with a heavy nubtex vinyl laminate outside and 1/8″ thick dense poly foam lining inside. The corru-cube dividers are made of single wall corrugated board sheets with 1/8″ thick poly foam on one side. These sheets are then scored and formed into a 4 sided square compartemnt and taped together at the seam. Once there are a number of these corru-cubes in the case they hold each other together fairly strong. This is an inexpensive way of dividing your lights. * Note – these dividers are not attached to walls of case. They are just sized correctly for the ID of the case and pushed inside. The case also comes with all recessed hardware and steel flat corners which make the cases very easy to stack. This line of cases is available in 4 great sizes and will fit many lights on the market today.
Simply measure your lights and choose the size cubed case that fits best for you. Additional foam in each cube can be used to take up any extra space if needed. You can also consider putting two lights in each of the bigger cubed cases separated by a foam divider. Inside dimensions of cubes are listed in both the title of the photo and at the bottom of the photo.
We ship to anywhere in the US except Alaska, Hawaii, Puerto Rico, Guam or the Virgin Islands. We also do not ship to Canada.
|
Only $199.00
 |
|
|
|
 |
|
Buy with confidence
|
|
