Buy with confidence
!!IF YOU ORDER FROM THIS AUCTION MAKE SURE TO TELL US WHAT INSTRUMENT THE BACKLIGHT IS FOR SO WE CAN SEND YOU THE CORRECT ONE !!
YOU MIGHT FIND A CHEAPER BACKLIGHT
BUT YOU WON’T FIND A BETTER BACKLIGHT
MADE IN THE USA
PROVIDES LIGHT FOR APPROX. 6000 HOURS
SEE FULL LIST OF INSTRUMENTS WITH REPLACEABLE BACKLIGHTS BELOW
NEW! PAYPAL NOW ACCEPTED!
¡NUEVO! ¡PAYPAL AHORA ACEPTADO!
NEW! FREE SHIPPING!
¡NUEVO! ¡ENVÍO LIBRE!
FREE EMAIL OF BACKLIGHT INSTALLATION INSTRUCTIONS!
EMAIL GRATIS DE INSTRUCCIONES DE INSTALACION LUZ DE FONDO!
WE NO LONGER ACCEPT INTERNATIONAL ORDERS
THROUGH US BASED FREIGHT FORWARDERS
International customers must call or email us directly (info below)
*CALL FOR QUANTITY DISCOUNTS*
*CONVOCATORIA DE DESCUENTOS
IF YOU DON’T SEE YOUR INSTRUMENT AT THIS AUCTION
CHECK OUR OTHER AUCTIONS
PLEASE CALL 714-998-3001 OR EMAIL US AT telesisATtelesisgearDOTcom
INTERNATIONAL ORDERS ACCEPTED USING PAYPAL OR CC but international customers must contact us using the information above.
THIS AUCTION IS FOR BACKLIGHTS THAT FIT INSIDE OF THE LCD DISPLAYS OF THE INSTRUMENTS LISTED BELOW
ASQ10 ( ASQ-10 ), CD3000series (
CD-3000 ),MPC3000 ( MPC-3000
), MPC60 ( MPC-60 ), MPC60 II ( MPC-60 II ), S1000 series ( S-1000 ),
S1100 (S-1100 ), S3000 series ( S-3000 ),
S3200 (S-3200 ), S900 ( S-900 ), S950 (S-950 ), VX600 ( VX-600 )
CZ-1 (CZ-1 ), FZ1 (FZ-1 ), FZ10 (FZ-10 ), VZ1 ( VZ-1 ), VZ10M (VZ10-M )
MX8 (MX-8 )DYNACORD:
ADD1 ( ADD-1 )
MK76 ( MK-76 )
E4 ( E-4 ), EIV (E-IV ), E64 ( E-64 ), E6400 ( E-6400 ), Esynth (
E-synth ), EMULATOR II & II+ , E-III (all versions) , EMAX ,
EMAX II (all versions), ESI32 ( ESI-32 ), SP1200 ( SP-1200 )
HOG LIGHTING CONTROLLERS
HOG 2 wing , HOG 500 , HOG 1000
HS1 ( HS-1 ), Hs1m ( HS-1M )
K5 ( K-5 ), K5m ( K-5m ), K5000 ( K-5000 )KORG:
( A-1 ), A2 ( A-2 ), A3 ( A-3 ), DSS1 ( DSS-1 ), DS8 ( DS-8 ), i1 ( i-1 ),
i2 ( i-2 ), i3 ( i-3 ), O1r/w (O1RW ), O1 W , 01 W ( 01W , O1w ), O1/W-FD ( O1WFD ),
O1/W-pro ( O1Wpro ), N264 ( N-264 ), N364 ( N-364 ), RE1 ( RE-1 ), SDD3300 ( SDD-3300 ), T1 ( T-1 ), T2 (
T-2 ), T3 ( T-3 ), Wavestation , Wavestation EX ( Wavestation-EX
), Wavestation AD ( Wavestation-AD ), X2 ( X-2 ), X3 ( X-3 ), X3r ( X-3r )
K2000 ( K-2000 ), K2VX (K-2VX ), K2000r ( K-2000r )LEXICON:
AUTOGRAPH, C8p, MULTIFEX
A50 (A-50 ), A80 ( A-80 ), D550 (D-550 ),D70 ( D-70 ),DJ70
(DJ-70 ), DJ70 MK II (DJ-70
MK II )E660 ( E-660 ),
G800 ( G-800 ), GC8 ( GC-8 ), Juno2 ( Juno-2 ), Juno1
( Juno-1), JW50 ( JW-50 ),MC500 (MC-500 ),
MC 500 MK II ( MC-500 MK II ) MKS20 (
MKS-20 ), MKS80 ( MKS-80), MV30 ( MV-30), PG1000 ( PG-1000 ), S10 ( S-10 ), S770
(S-770 ), S750 ( S-750 ), SP700 (SP-700 ), VK1000 (
VK-1000 ),W30 (W-30 )SAMICK:
SXP501 ( SXP-501 ) SEQUENTIAL CIRCUITS:
PROPHET VS ( PROPHET-VS ) STUDER:
A727 (A-727 )
( DX-1 ), DX5 ( DX-5 ), SY77 ( SY-77 ), SY99 (SY-99 ), TG77 (TG-77 ),
REV7 ( REV-7 ), W5 (W-5 ), W7 ( W-7 ), QS300 ( QS-300 ).
DO NOT PRY APART YOUR DISPLAY. DAMAGE MAY RESULT!!
CONTACT US IF YOU HAVE ANY QUESTIONS OR DO NOT SEE YOUR INSTRUMENT ON THE LIST
CONTACT INFORMATION IS LISTED BELOW.
Our backlights have the contacts in the correct position for your display. No messy jumpers needed. There
is minor soldering involved. Most people consider this a repair they
can do themselves. You can also take your instrument to a service center
and have them do it.
ship to all worldwide locations serviced by the US post office.
Shipping charges vary on international destinations. Ask for freight
charges when ordering.
We also include an email of the contents of a CD that is free with a backlight order. The
email is a generic explanation of what to do once the display has been removed from the
instrument. Your instrument may be different than what is shown but the principle is the same.
Again, DO NOT pry apart your display as damage may occur. The email is
helpful when working on Korg, Akai, and other displays. ALL INFORMATION
ABOUT TOOLS IS ON THE email.
NOTICE: WE WILL NOT BE HELD RESPONSIBLE FOR ANY LOSS/ DAMAGE OR INJURY
RESULTING FROM THE INSTALLATION OF REPLACEMENT BACKLIGHTS. IF YOU ARE IN
ANY DOUBT AS TO YOUR ABILITY TO INSTALL THEM PLEASE REFER INSTALLATION
TO SUITABLY QUALIFIED PERSONNEL. WHILE EVERY EFFORT IS MADE TO ENSURE
THAT THIS INFORMATION IS CORRECT,WE CAN NOT BE HELD RESPONSIBLE FOR
LOSS/DAMAGE OR INJURY RESULTING FROM ANY ERRORS CONTAINED WITHIN THIS
will most likely need a new backlight but make sure the inverter is
working. An easy test is turn the instrument on in a very dark room. If
there is even a slight glow the inverter is good. If there is no glow it
could be the inverter or just a totally dead backlight. If the light is
completely dead you need to check the inverter either at the backlight
contact points or at the inverter voltage output pins to see if there is
power going to the backlight (approx. 70-100vac @ 400hz). If there is
power you only need a new backlight. If there is no power you need to
fix the inverter circuit and it is very likely that you also need a new
backlight. If you don’t have proper test equipment you can order and
install a new backlight (which you most likely need anyway) and if that
doesn’t fix it you will need to hunt down the problem in the inverter
TELESIS USED GEAR AND BACKLIGHTS
P.O. BOX 19015
ANAHEIM HILLS, CA 92817
Phone – (714) 998-3001
US, and CANADA BIDDERS GO AHEAD AND BID
We accept credit cards from all international bidders.
Ebay requires all international bidders call or email us before bidding. (714-998-3001) or telesisATtelesisgearDOTcom
Buy with confidence